Feature request: bubble?

Discussions about the RealTraffic client application
Post Reply
Will
Posts: 28
Joined: Sat Aug 24, 2024 1:05 pm

Feature request: bubble?

Post by Will »

What do you think about a button on the main GUI called "Bubble" (or whatever you like), that when you press it, removes all traffic on the GIU's screen except for those within +/- 3000 ft vertically of the user's aircraft?

The idea is that by clicking the "Bubble" button, you could clearly read the data tags for the aircraft that are most relevant, without those data tags being overwritten by aircraft will never be of any operational relevance.

Thanks for considering it!

Will

(Edited to add “vertically” above.)
admin
Site Admin
Posts: 46
Joined: Sun Aug 18, 2024 9:03 am

Re: Feature request: bubble?

Post by admin »

Thanks Will, I'll consider that for the next release.
admin
Site Admin
Posts: 46
Joined: Sun Aug 18, 2024 9:03 am

Re: Feature request: bubble?

Post by admin »

This is now implemented in the latest beta (release 255)
Will
Posts: 28
Joined: Sat Aug 24, 2024 1:05 pm

Re: Feature request: bubble?

Post by Will »

Thanks, looking good!
Will
Posts: 28
Joined: Sat Aug 24, 2024 1:05 pm

Re: Feature request: bubble?

Post by Will »

Beta 10.0.259 ---

The 3000' bubble is great, thanks!! But it seems to be selected by default whenever I start RealTraffic. (Maybe if someone selects it just once, there's a perpetual entry in a config file that always re-selects that mode every time RealTraffic is started?)

I would recommend that RealTraffic either start with the last selected mode, or else always start with "Show all."

Thanks,

Will
admin
Site Admin
Posts: 46
Joined: Sun Aug 18, 2024 9:03 am

Re: Feature request: bubble?

Post by admin »

The selection criteria for the labels should be stored in your local configuration - if you selected the bubble and hit "save" for the configuration it'll reload that. Are you seeing differing behaviour?
Will
Posts: 28
Joined: Sat Aug 24, 2024 1:05 pm

Re: Feature request: bubble?

Post by Will »

Okay, I see. Hitting Save with "Show all" lets it now load with "Show all" engaged.

Thanks!
Post Reply